Reactors

Wujiang High Voltage Shunt Reactor (up to 1100 kV / 240 MVAr)

Oil-immersed shunt reactors for transmission networks, including a 1100 kV 240 MVAr low-noise unit. Absorbs the capacitive charging current of long lines and cables to hold system voltage within limits.

Share This Product :

Wujiang High Voltage Shunt Reactor (up to 1100 kV / 240 MVAr)

Long overhead transmission lines and underground cables behave capacitively at light load, pushing system voltage up at the receiving end — the Ferranti effect. A shunt reactor absorbs that surplus reactive power and holds the voltage profile inside limits. Wujiang Transformer manufactures oil-immersed shunt reactors across the transmission range, including a 1100 kV, 240 MVAr low-noise unit and the BKD-70000-500 and BKD-20000-330 designs.

Where Shunt Reactors Are Needed

  • Long EHV and UHV overhead lines, where charging current would otherwise raise receiving-end voltage above equipment ratings
  • Underground and submarine cable circuits, whose charging current per kilometre is far higher than an equivalent overhead line
  • Lightly loaded networks and off-peak conditions on any long transmission corridor
  • Offshore wind export cables, where reactive compensation is usually required at both ends
  • Limiting switching overvoltages and, with a neutral reactor, aiding secondary arc extinction for single-pole auto-reclose

Typical Specification

  • Voltage class: 35 kV to 1100 kV
  • Rating: to 240 MVAr; BKD-70000-500 and BKD-20000-330 among the standard designs
  • Type: oil-immersed, gapped iron core, three-phase or single-phase banks
  • Configuration: line-connected or bus-connected; neutral earthing reactors available
  • Cooling: ONAN or ONAF
  • Noise: low-noise designs available — reactor noise is often the binding constraint on substation siting near populated areas
  • Standards: IEC 60076-6, GB, or the buyer’s specification

Also Available

Series reactors for fault current limiting, smoothing reactors for HVDC converter stations, and the BKS-60000-35 design for lower voltage compensation duty.

Requesting a Quotation

Specify system voltage, required reactive power, three-phase or single-phase bank, connection point, neutral arrangement, noise limit at a stated distance, and the governing standard. Where the reactor is for a cable circuit, include the cable length and charging current so the compensation degree can be confirmed. Submit the enquiry through IndusGrove.

Designed and tested to IEC, ANSI/IEEE, GB and BS standards, or to the customer technical specification. Full type, routine and special testing available in-house, including sudden short-circuit testing. Contact via IndusGrove for capacity, voltage ratio, vector group and delivery.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.