Transformer Bushings

Yash OIP Condenser Bushing (24 kV – 245 kV)

Oil impregnated paper condenser bushings for power transformers from 24 kV to 245 kV, with porcelain or silicone housing. Supplied against IEC 60137:2017 or IEEE C57.19.00/01, with more than 140 standardised model type tests available from ILAC accredited laboratories.

Share This Product :

Yash OIP Condenser Bushing (24 kV – 245 kV)

The oil impregnated paper (OIP) condenser bushing is the most widely deployed bushing type in high voltage transmission worldwide. It carries the transformer winding connection through the earthed tank wall while controlling the electric field with a capacitively graded condenser core — layers of kraft paper interleaved with conducting foils, vacuum dried and impregnated with insulating oil.

Why the Condenser Core Matters

Without grading, the field at the point where the conductor passes through the earthed flange would be intense enough to break down the insulation. The condenser core divides that stress into a series of near-equal steps, so the radial and axial field distribution stays within the capability of the paper and oil. Foil placement, layer thickness and drying quality are what separate a bushing that lasts forty years from one that fails in ten. Bushing failure is a leading cause of catastrophic transformer loss, frequently ending in tank rupture and fire, which is why utilities scrutinise this component more closely than its cost would suggest.

Typical Specification

  • Voltage class: 24 kV to 245 kV to IEC; 15 kV to 230 kV to IEEE
  • Insulation: oil impregnated paper condenser core
  • Housing: brown or grey glazed porcelain, or silicone rubber for high pollution and seismic service
  • Mounting: flange with adjustable inclination for transformer turret or wall installation
  • Test tap: capacitance and tan delta measurement tap fitted as standard
  • Bushing current transformer: accommodation for BCTs to customer specification
  • Standards: IEC 60137:2017, IEEE C57.19.00 and C57.19.01, or equivalents
  • Customisation: creepage distance, oil end length, mounting, terminations and BCT arrangement

Porcelain or Silicone?

Porcelain remains the default for inland substations with a long service record and a hard, easily cleaned surface. Silicone housed units are specified where pollution severity is high — coastal salt fog, desert dust, cement and refinery environments — because the hydrophobic surface suppresses leakage current and dry band arcing. Silicone is also markedly lighter and will not shatter, which matters in seismic zones and on long export shipments. Yash supplies both from the same works, so the choice is a specification decision rather than a supplier decision.

Applications

  • Power transformers and autotransformers in transmission and distribution substations
  • Generator step-up transformers
  • Reactors and other oil filled apparatus
  • Replacement and retrofit of existing bushings of any global make

Ordering Information

Specify rated voltage and current, governing standard, housing material, minimum creepage distance, oil end and air end lengths, mounting flange details and inclination, terminal arrangement, and BCT requirements. Where the bushing is a replacement, supply the existing drawing or ask about the on-site measurement service. Submit the enquiry through IndusGrove and it is routed to the Yash Highvoltage sales team.

Type tested at ILAC accredited laboratories, with more than 140 standardised model type tests available. Supplied against IEC 60137:2017, IEEE C57.19.00/01 and equivalents. Retrofit and interchangeable solutions available for existing bushings of any global make. Contact via IndusGrove with voltage class, current rating, creepage and mounting details.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at info@indusgrove.com.