Amorphous Alloy Cores & Ribbon

Three-Phase Amorphous Core Sets for Distribution Transformers

Matched three-phase amorphous core sets, including five-limb wound-core designs, sized to standard distribution transformer ratings from 30 kVA to 2500 kVA.

Share This Product :

Three-phase amorphous distribution transformers are normally built on a wound-core, five-limb arrangement rather than the stacked three-limb construction familiar from silicon steel. The reason is mechanical: amorphous ribbon cannot be stacked and interleaved like laminations, so the core is wound as closed loops and the winding is fitted around it.

Yunlu supplies these as matched sets — the limbs are produced, annealed and loss-tested together so the three phases have consistent magnetic properties, which keeps no-load current balanced and audible noise predictable.

Typical coverage

  • Ratings from roughly 30 kVA through 2500 kVA
  • Standard distribution voltage classes up to 35 kV
  • Matched limb sets with test certificates per set

Design caution worth knowing: amorphous cores saturate at a lower flux density than CRGO — around 1.5 T against 1.9 T — so an amorphous transformer needs a physically larger core section for the same rating. It will be bigger and heavier than the silicon steel unit it replaces. On pole-mounted retrofits, confirm the pole and bracket loading before specifying.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].