Current Transformers (CTs)

ZDVolt Bushing Current Transformers (12 kV – 1100 kV)

Ring-type bushing current transformers for transformers, GIS and circuit breakers, 12 kV to 1100 kV, 50 A to 40,000 A. Oil, SF6 and adhesive-sealed constructions to relay and metering accuracy under IEC, ANSI/IEEE, CSA and GOST.

Share This Product :

ZDVolt Bushing Current Transformers (12 kV – 1100 kV)

A bushing current transformer is a toroidal core and secondary winding fitted around the bushing or the apparatus conductor, using the primary conductor itself as a single-turn primary. Because it needs no separate primary insulation, it is the most compact and economical way to obtain current measurement inside a transformer turret, a GIS enclosure or a circuit breaker.

Range

  • ZDC-OIP — oil type, for transformer bushing and turret installation
  • ZDC-GS — SF6 type, for GIS and gas insulated apparatus
  • ZDC-AS — adhesive sealed type
  • Voltage range: 12 kV to 1100 kV
  • Current range: 50 A to 40,000 A
  • Accuracy: relay and metering classes per IEC, ANSI/IEEE, CSA and GOST; also GB, AS, BS, CAN, NBR and JEC
  • Structural types: ring-type, GIS modular and assembled, circuit breaker, and transformer bushing-mounted

Integrated Bushing, CT and Turret

ZDVolt also supplies the IBCT assembly — bushing, current transformers and turret delivered as one integrated unit for 36 kV to 1100 kV in nitrogen, SF6 or oil type. For a transformer builder this removes an interface: rather than sourcing bushing, CTs and turret separately and reconciling three sets of tolerances and three warranties, the assembly arrives tested as a unit. On large transformers that is a meaningful reduction in assembly time and in the risk of a mismatch discovered late.

Why the Manufacturing Base Matters

Around 1.3 million GIS and breaker BCTs and 500,000 transformer BCTs had shipped by end of 2025. CT accuracy depends on core material consistency and winding precision, both of which reward volume and automation. ZDVolt winds its BCT cores in a dedicated automated facility rather than buying them in.

Applications

  • Protection and metering current measurement inside transformer turrets
  • GIS bays and gas insulated apparatus
  • Circuit breaker current measurement
  • Retrofit of CTs on existing transformers during bushing replacement

Ordering Information

Specify system voltage, primary current, the required ratio or ratios and tap arrangement, accuracy class and burden for each core, number of cores, the bushing or conductor diameter the CT must fit, and the insulating medium. Submit the enquiry through IndusGrove.

Manufactured at Jurong, Jiangsu, China, with a North American office in Palo Alto, California. Certifications: ISO 9001, ISO 14001, ISO 45001, GOST, UL, and ISO/IEC 17025 accredited laboratories. Average lead time approximately five months. Custom designs and replacement bushings for existing transformers available.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].