HVDC Bushings

ZDVolt HVDC Wall Bushing (up to ±800 kV)

RIP HVDC wall and apparatus bushings rated to ±800 kV under IEC/IEEE 65700-19-03:2025, with a ±1100 kV design having passed type test. Current rating made to order for the converter station scheme.

Share This Product :

ZDVolt HVDC Wall Bushing (up to ±800 kV)

The wall bushing that carries DC from the valve hall to the outdoor switchyard is one of the most demanding insulation components in an HVDC scheme. It is large, it is on the critical path of the project, and very few manufacturers in the world can build and type test one.

Why DC Bushings Are a Different Engineering Problem

  • DC field distribution is resistive, not capacitive. Under AC the field follows permittivity; under DC it follows resistivity, which is strongly dependent on temperature and on the thermal gradient through the insulation. The field therefore redistributes as load changes, and design must account for the whole operating envelope rather than a single condition.
  • Polarity reversal. In line-commutated schemes, reversing power flow reverses polarity, and trapped space charge in the insulation can transiently add to rather than oppose the applied field.
  • Space charge accumulation. Charge injected into solid insulation under sustained DC builds over time and distorts the field in ways that have no AC analogue.
  • Physical scale. A ±800 kV wall bushing is many metres long, and the external creepage requirement under DC with pollution is far more onerous than the AC equivalent.

Ratings

  • ZDD-RIP apparatus bushings: up to ±800 kV, current made to order
  • ZDW-DC-RIP wall bushings: up to ±800 kV, current made to order
  • Standard: IEC/IEEE 65700-19-03:2025
  • AC wall bushings also available: ZDW-AC-OIP and ZDW-AC-RIP, 72.5 kV to 550 kV IEC or 25 kV to 500 kV ANSI/IEEE, 400 A to 5,000 A

Milestones

  • 2020 — ±800 kV DC wall bushing delivered
  • 2020 — ±1100 kV DC wall bushing passed design test
  • Supported by an in-house 1100 kV test laboratory with ISO/IEC 17025 accreditation

Applications

  • LCC and VSC HVDC converter station valve hall wall penetrations
  • Back-to-back converter stations and asynchronous grid interconnections
  • Long distance bulk transmission corridors
  • Offshore wind HVDC export terminals
  • DC apparatus bushings on converter transformers and smoothing reactors

Ordering Information

HVDC bushings are engineered to the scheme. Provide the DC voltage and current rating, wall thickness and orientation, pollution severity, seismic requirement, polarity reversal duty, and the project standard. Submit the specification through IndusGrove.

Manufactured at Jurong, Jiangsu, China, with a North American office in Palo Alto, California. Certifications: ISO 9001, ISO 14001, ISO 45001, GOST, UL, and ISO/IEC 17025 accredited laboratories. Average lead time approximately five months. Custom designs and replacement bushings for existing transformers available.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].