Gas Insulated Switchgear (GIS)

Zhengchao ZCSFC-12 SF6 Gas-Insulated Switchgear 12 kV

12 kV metal-enclosed SF6 gas-insulated switchgear rated 1250, 2500 or 3150 A with 31.5/40 kA breaking capacity for 4 s.

Share This Product :

The Zhengchao ZCSFC-12 is a metal-enclosed, gas-sealed switchgear cubicle using low-pressure SF6 as the insulating medium. High-voltage components sit in a sealed compartment that keeps them free of moisture and dust, so the equipment can operate without maintenance across varying environments and altitudes, and a solid-sealed pole carries the vacuum interrupter for a compact and stable structure.

An intelligent control and protection device integrates control, protection, measurement and communication in the panel, meeting distribution-network automation requirements. The cubicle is designed as three-phase AC indoor equipment for single busbar, double busbar and bus-section arrangements.

Main technical parameters published by the manufacturer: rated voltage 12 kV; rated frequency 50/60 Hz; rated current 1250, 2500 or 3150 A; rated power-frequency withstand 42 kV phase-to-phase and to earth, 48 kV across the isolating distance; rated lightning impulse withstand 75 kV phase-to-phase and to earth, 85 kV across the isolating distance, extendable to 95 and 110 kV on request; control and auxiliary circuit withstand 2 kV; rated short-circuit breaking current 31.5 or 40 kA with a rated duration of 4 s and 30 breaking operations; rated short-circuit making current 80 or 100 kA; single capacitor bank breaking 630 A, back-to-back 400 A; cable charging breaking current 25 A; rated operating sequence O-0.3s-CO-3min-CO; rated SF6 inflation pressure 0.025 MPa at 20 degrees C with a minimum functional level of 0.01 MPa; sealed box IP67 and enclosure IP4X; annual leakage no more than 0.01%; auxiliary supply AC 380 V or AC 220 V; control supply DC 110 V, DC 220 V or AC 220 V; loss of service continuity category LSC2.

Cubicle dimensions are 500 mm wide at 1250 A, 800 mm at 2500 A and 900 mm at 3150 A, all 2200 mm high, with depths of 1400 mm, 1400 mm and 1600 mm and weights of 900 kg, 1300 kg and 1500 kg respectively.

Applications include power plants, substations, commercial buildings and industrial facilities where a sealed, compact 12 kV primary distribution board is required.

No additional information.

Need a quotation for this product?

Send us your specification and we route the enquiry straight to the manufacturer’s export team. Requesting a quotation through IndusGrove is free.

Independent listing. IndusGrove is an independent B2B directory for the power, electrical and renewable energy industry. We are not a distributor, agent or authorised reseller for the manufacturers listed here, and we do not hold stock. Manufacturer names, brand names, model numbers and trademarks are the property of their respective owners and appear here for identification and reference only.

Product information is compiled from publicly available manufacturer sources and may change without notice. Verify all specifications, ratings and compliance data with the manufacturer before purchase. Enquiries submitted through this page are referred to the manufacturer or its authorised channel.

Manufacturers may request an amendment or the removal of any listing at [email protected].