| Location | Yuhuan, Taizhou, Zhejiang, China |
|---|---|
| Certification | ISO 9001, ISO 14001 |
| Materials | Brass, bronze, copper and aluminium alloys |
| Manufacturing | Gravity casting, forging, machining, polishing, assembly in house |
| Notable customer | Legrand |
| Markets | Americas, Europe, Middle East, Africa, Asia, Oceania |
| Terms | FOB, CIF, EXW · L/C, T/T, D/P · Ningbo and Shanghai |
| Lead time | 15 working days off season, around one month in peak |
Bolei manufactures the metalwork of earthing and lightning protection systems — ground clamps, tape clamps and B-bonds, air terminals and bases, earth rods, copper cable lugs and connection accessories. Based in the Longxi Industrial Zone at Yuhuan, Taizhou, on the Zhejiang coast, the company has over ten years in the business and works to IEC/BS EN 62561-4 with a stated 50 year design life.
It is ISO 9001 and ISO 14001 certified, exports more than 90% of output, and counts Legrand among its customers.
Earthing components are cheap, unglamorous and bought on price. They are also the part of an electrical installation most likely to have quietly stopped working by the time anyone needs it.
The reason is corrosion at the joint. Bury dissimilar metals in wet soil and you have built a galvanic cell — the more anodic metal corrodes preferentially, and a connection that measured a fraction of an ohm at commissioning becomes effectively open circuit within a few years. Nobody notices, because earthing systems are buried, unmonitored and almost never retested. The failure only surfaces when there is a fault and the protection does not see it, or when someone touches metalwork that should have been at earth potential and is not.
That is why material specification at the connection matters far more than the unit price suggests, and why solid brass and bronze bodies with stainless steel fasteners are worth the small premium over plated steel.
IEC 62561 is the standard series written specifically for lightning protection system components, and it exists because these parts face a duty no ordinary electrical connector is designed for: carrying a lightning current pulse without welding, fracturing or vaporising. A clamp that is a perfectly good electrical connector is not automatically a compliant lightning protection component.
On tenders in the Gulf, Europe and increasingly across Asia and Africa, that distinction is a pass or fail at technical evaluation. Bolei manufactures to IEC/BS EN 62561-4 across the connection range, which is the qualification most low-cost suppliers in this category cannot demonstrate.
The wider catalogue also includes earth rods and couplers, tape fasteners and down conductor clips, parallel and grounding connectors, and single-conductor copper mounts for ranges up to 1000 kcmil.
Bolei runs a full in-house production chain — gravity casting, forging, machining, polishing and assembly — across four production lines with capacity up to 200,000 pieces a month. Working the metal from casting through to finished part in one facility is what allows consistent alloy specification, which in this category is the thing that actually determines service life.
| Location | Longxi Industrial Zone, Yuhuan, Taizhou, Zhejiang, China |
| Certification | ISO 9001, ISO 14001 |
| Standard | IEC/BS EN 62561-4 |
| Design life | 50 years stated |
| Monthly capacity | Up to 200,000 pieces |
| Annual output value | USD 5–10 million |
| Grounding clamp output | Around 300 tonnes a year |
| Export share | More than 90%, exporting since 2012 |
| Markets | North and South America, Western and Eastern Europe, Middle East, Africa, South East and East Asia, Oceania |
| Notable customer | Legrand |
| Incoterms | FOB, CIF, EXW — ports Ningbo and Shanghai |
| Payment terms | L/C, T/T, D/P |
| Lead time | Within 15 working days off season; around one month in peak season |
| OEM / ODM | Available, to customer samples or drawings |
Because of galvanic corrosion at the buried joint. Keeping the electrode, the clamp and the conductor at compatible electrochemical potentials is what makes the connection survive. Plated steel saves a small amount per piece and fails invisibly.
Requirements for conductor fasteners and connection components in lightning protection systems — specifically their ability to withstand lightning current without failing mechanically or electrically. It is a different and more demanding test regime than general electrical connector standards.
Typically 1,000 pieces per item, with trial orders and smaller quantities negotiable. Samples are available.
Yes — the company positions itself as supplying overall solutions for lightning protection and earthing projects rather than loose components. Supply the design or bill of quantities, or the site parameters if the design has not been done.
Provide the bill of quantities with sizes and materials, the governing standard, and quantities per item. Submit the enquiry through IndusGrove.
IndusGrove lists Bolei products for buyer discovery and enquiry routing. Technical data should be confirmed against the manufacturer’s current datasheets before purchase.